Released 22/11/2022 - Previous version 4.152
Please note this firmware release only applies to the zappi v2 with built in Ethernet, WiFi and "vHub". These zappis have a serial number starting with a "2" or higher
It does not apply to previous versions of zappi without the built in WiFi/Ethernet.
This firmware release provides support for the new tamper protection requirements that come into effect for new EV chargers installed in England, Scotland and Wales from 30/12/2022
We have also made some changes to the communications with the server that should resolve issues experienced by some customers where the "vHub" in the zappi stops hearing packets from the myenergi servers.
Timezones displayed in correct order in the Time & Date menu
Update to the DHCP client code to handle the way some routers issue IP addresses. This should resolve problems experience with some routers where the zappi stops talking to the myenergi server when the IP address is renewed.
New Features / Enhancements
Changes to the way that the zappi selects a UDP port when connecting to the server. This should resolve problems experienced with some routers that where the zappi stops hearing packets from the myenergi servers.
Provided your zappi is connected to the internet the firmware will download automatically over the week following the firmware release. The final step to install the firmware is carried out from the local zappi controls - see this article for more details: Updating the firmware on your zappi v2 + WiFi/vHub
Please sign in to leave a comment.