To create a timed boost charge on an Eddi:
- Press the X button
- Press the down arrow to ‘Heater settings’ and press the ‘TICK’ button
- Press the (tick) button on the ‘Boost timer’
- Press the (tick) on 'Heater 1 Top'
- On the first row of the page, press the (tick)’ button to highlight the first two ‘00’ of the start time and using the up/down arrows, select the hour for the start time
- Press the ‘’ button to select the second two ‘00’ of the start time and using the up/down arrows, select the minutes for the start time
- Press the ‘(tick)’ button to move to the ‘Dur’ column and set the duration of the charge required by pressing the ‘up’ arrow button – NOTE this is not the stop time, it is the duration of the charge cycle
- Press the ‘(tick)’ button to the series of dashes, and use the ‘up’ arrow, followed by the ‘+’ button to set the days of the week required for the timed charge
- Press the X button until you return to the main display screen
Now a boost timer is set for Output 1 on Eddi.