Released 10/07/2023 - Previous version 5.168
Please note this firmware release only applies to the eddi v2.1 with built in Ethernet, WiFi and "vHub". These eddis have a serial number starting with a "2" or higher
It does not apply to previous versions of eddi without the built in WiFi/Ethernet.
- Hot cancel delay now setting now prevents a timed/scheduled boost exiting early when connected load switches to open circuit (heater thermostat opens)
This feature is important when using a thermal store as the thermostat in the heating element may open but then the heat energy dissipates into the phase change material and the thermostat will close again, allowing more heat to be delivered.
Once the hot cancel delay has timed out then the scheduled boost will end.
Full details of the v5 firmware are available at: V5 Firmware - What's new?
Important - when updating to V5 firmware (from v2, v3 or v4) it is important that all zappis and eddis are also updated to V5 so that they can continue to work together. Please see this article for full instructions on how to update your hub, eddi and zappi