Released 19/07/2023 - Previous version 5.052
Please note this firmware release only applies to the zappi v2 with built in Ethernet, WiFi and "vHub". These zappis have a serial number starting with a "2" or higher
It does not apply to previous versions of zappi without the built in WiFi/Ethernet.
This firmware release includes some major changes which will allow zappi 2.1's to
- have multiple PIN codes set up, which then allows charging sessions to be tracked to individuals / vehicles in myaccount. The preferred mode can also be set so that zappi automatically switches to this mode when the PIN code is entered.
- be connected to an OCPP server, for reporting and access control via a third party
To use the feature, you will need to enable PIN lock on your zappi. (In later releases this will be done automatically, on setting up your first PIN).
To setup the lock function, please follow this article: How do I set a PIN code on my zappi
Your master PIN code, set on zappi, will continue to work as normal.
Instructions on setting up multiple PIN codes are here: How can I manage multiple users with zappi?
Once the PIN codes are set up, the myaccount charge logs will show the name associated with the PIN code used to unlock the zappi when the charge started.
Full details of the v5 firmware are available at: V5 Firmware - What's new?
Important - when updating to V5 firmware it is important that all zappis and eddis are also updated to V5 so that they can continue to work together. Please see this article for full instructions on how to update your hub, eddi and zappi