Updating the firmware on the hub
To make sure you have the latest firmware on your hub
Unplug the power to the hub
Press and hold the download button
Plug the power back in again while continuing to hold the download button
Keep holding the button down until power light will turn yellow, then release the download button
The power light should now change to green and the “server” LED should now turn white for up to a minute (although this may take a lot longer if the server is heavily loaded – please be patient).
When the firmware on the hub as been updated the server light will return to blue or green.
How do I know what firmware I have on my hub?
There's no need to check what firmware you have on your hub - simply follow the instructions above and your hub will be updated.
However, if you want to check what firmware you have you can check in the myenergi app
What is the latest firmware version?
This depends on the version of the hub that you have. The hubs may look the same and they work almost exactly the same way. The latest firmware is either:
- 3401S3501 - for hubs with a serial number starting with a "1", or
- 3402S4047 - for hubs that start with any other number