• Total activity 47
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 8
  • Subscriptions 20

Activity overview

Latest activity by Kieran
  • Kieran created an article,

    MG EVs Charge Delayed

    Some owners of UK electric vehicles, particularly the MG ZS EV, who struggle to get their cars charged at home are finding that the culprit can sometimes be traced back to the use of Powerline (Hom...

  • Kieran created an article,

    What is the Minimum Green Level?

    Minimum Green Level is a setting within Zappi to allow those who may not have enough solar capacity to allow for a purely surplus-based charge.  When is set to a Min Green Level of 100% you will ne...

  • Kieran created an article,

    DC/Hybrid PV not showing on device display but does on app?

    We are asked often why a customer cannot see the power flows from the inverter on the device screen when the inverter is a Hybrid/DC-Coupled system.    What is a Hybrid Battery? Battery systems tha...

  • Kieran created an article,

    PE Fault - Zappi 2

        Within Zappi the PE check is an advanced feature in the zappi which is not provided by most other EV chargers. It uses the impedance of the supply back to the primary transformer to confirm th...

  • Kieran created an article,

    Setting a scheduled boost in the app for Eddi

    Setting a scheduled boost in the app for Eddi In the app, touch the Eddi icon on the main screen to open the Eddi details page Tap on the tank/output you wish to set the timer for. Now touch where...

  • Kieran created an article,

    Do you need a Solar CT?

    A common question we are asked is do I need a solar CT Clamp to use the surplus solar I have and where does it go?     So, out of the box Zappi/Eddi has a CT included, this should be placed onto th...

  • Kieran created an article,

    What height to mount a Zappi?

    The installation height requirements for an Electric Vehicle (EV) socket outlet have been removed in Amendment 1 of the 18th Edition. However, BS 7671:2018+A1:2020 refers to the BS 8300 series, whi...

  • Kieran created an article,

    What does the HUB do?

    The Hub will allow you to do the following:  Set timers, and use boost functions. Prioritise your Myenergi products. (if applicable).  Data Graphs to show charge history and habits.  Monitor grid ...

  • Kieran created an article,


    The fully electric Mini does often come from the dealerships set to a slower charge rate.  If you look on Menu>Information the MIN PWM if shows 53% Zappi is offering a full charge speed to the vehi...

  • Kieran created an article,

    3 Phase Zappi showing only Single Phase Charge Abilities.

    If you find a 3-phase Zappi only charging in a single phase most common of all it's due to an error on installation.Zappi’s terminals blocks are not as you would expect and do require the installer...