V5 Firmware - Updating an eddi v1

These instructions apply to the eddi v1
(The eddi with one aerial and serial number starting with a "1")

• 1. Turn off the eddi using the rocker switch at the bottom of the case
  2. Press and hold the tick button
  3. Now turn the eddi back on again whilst still holding the tick button until the following message appears
     
  4. Now select the menu to Download Latest Firmware
     
  5. Eddi will download the latest firmware and then reboot. 

Now update the firmware on your other myenergi devices

Select the device that you would like to update next

I have an eddi v1 (with a serial number starting with "1")	I have a zappi v2.0 (with a serial number starting with "1")	I have an eddi v2 (with built in WiFi and serial number starting with a "2")	I have a zappi v2.1 (with built in WiFi and a serial number starting with a "2")	I've updated all my devices
Problem solving... Unfortunately, sometimes things go wrong We've assembled details of the most common issues and their solution here