Released 26/04/2024 - Previous version 5.424
Improvements
- The installation assistant has been updated which guides an installer through setting the “installation settings” passcode.
We now encourage installers to actively set a passcode on the device. The settings behind the new “Installer Menu” all pertain to the install settings and should not be altered by the end user. With this we’ve also changed what can be found in the advanced menu, as these should no longer relate to the install.
NOTE: On pre-installed systems the old passcode required to access the “Advanced Menu” is now needed to access the “Installer Menu”. No passcode is required to access the new “Advanced menu”.
Provided your libbi is connected to the internet the firmware will download automatically over the week following the firmware release. Once downloaded you can complete the installation at the libbi controller.
Alternatively you can complete the firmware installation from the libbi local controls - see this article for more details: Updating the firmware on your libbi