Code 157 / W06: Bat Under Volt

If your libbi displays Code 157 / W06: Bat Under Volt, the battery voltage is under the required operating threshold. 

What does this mean?

Your libbi continually monitors the voltage level of the connected battery modules to ensure they are operating safely and efficiently. When the battery voltage drops too low, the system displays Code 157 / W06: Bat Under Volt as a protective measure.

Troubleshooting Steps

1. Power off the batteries by pressing the button on the front of the batteries. 
    
2. Turn the switch on the left-hand side of all the batteries off and then back on again.
    
3. Power in the batteries by pressing the button on the front of the batteries. 
    
4. Your libbi will then start to charge itself from the Grid to reach approximately 4% State of Charge (SOC). 
    

If the message does not clear, please contact the myenergi Technical Support Team.