Zappi 2.0 / Eddi v1 Ethernet Board - Updating Firmware

If you have installed the Ethernet adapter board in a zappi 2.0 or eddi v1 then updating the zappi firmware is not quite so easy.

Once the Ethernet board is installed the zappi / eddi downloads the firmware directly from the server and not from the hub.

To update the firmware try the following:

• Run the bootloader (More Settings - Advanced - System - Bootloader).
• From the bootloader menu, select the CloudIP option and change it to 185.106.134.196
  Note - this IP address is subject to change.  The correct IP address can be checked using the Windows Command nslookup firmware.myenergi.online 
• Then update the firmware from the bootloader menu.