If you have installed the Ethernet adapter board in a zappi 2.0 or eddi v1 then updating the zappi firmware is not quite so easy.
Once the Ethernet board is installed the zappi / eddi downloads the firmware directly from the server and not from the hub.
To update the firmware try the following:
- Run the bootloader (More Settings - Advanced - System - Bootloader).
- From the bootloader menu, select the CloudIP option and change it to 188.8.131.52
Note - this IP address is subject to change. The correct IP address can be checked using the Windows Command nslookup firmware.myenergi.online
- Then update the firmware from the bootloader menu.