By default, sending a remoteStartTransaction message to zappi, using OCPP, will result in the charger moving from STOP to FAST mode.
In some scenarios you may wish utilise the features of the ECO or ECO+ charging modes. You can choose which charging mode zappi is set to when a remoteStartTransaction message is sent, by changing the OCPPChargeMode parameter in the OCPP configuration
Accepted Values:
To configure, please enter values as shown in the table below:
Please ensure the correct case is used as failure to do so may result in change configuration request being rejected.
| Desired Default Mode | OCPPChargeMode Parameter |
| Fast | Fast |
| ECO | Eco |
| ECO+ | Eco_Plus |