Installation
How to open a harvi to add or adjust CT wiring
You might need to open your harvi if it was closed before adding CT wires, or if you want to add more CTs later. The ...
I can't pair my harvi - Australia and New Zealand only
When the eddi and zappi were first produced they were designed with radio that worked at 868MHz.
This is an unlicense...
Do I Need to Complete myenergi Training?
No – you do not need to complete myenergi training in order to install our products. If you’re a qualified electrici...
Installation Guidelines for harvi
Note: harvi must be installed indoors, in a location that complies with the required environmental limits, or in an I...
Off-Grid EV Charging with zappi & eddi | Installation Guide
Important myenergi products are designed for grid-connected systems and are not officially supported for off-grid us...
Changing radio frequency on myenergi devices
myenergi devices use radio frequency (RF) to communicate and pair with one another. Different regions require differe...
harvi Installation & Configuration Guide
The harvi is a wireless energy monitoring device designed to work seamlessly with myenergi products. It allows up to ...