Set-Up
CT Clamp and harvi Calculator for myenergi Installations | System Builder
Getting your CT clamp and harvi configuration right is essential for any myenergi installation — get it wrong and the...
Do I need to fit a grid CT Clamp?
Watch this short video which explains how the grid CT clamp works and why it’s required across the myenergi ecosystem...
Off-Grid EV Charging with zappi & eddi | Installation Guide
Important myenergi products are designed for grid-connected systems and are not officially supported for off-grid us...
Changing radio frequency on myenergi devices
myenergi devices use radio frequency (RF) to communicate and pair with one another. Different regions require differe...
Installing and Configuring the Relay & Sensor Board for the eddi
The Relay & Sensor Board is an optional accessory for the eddi, designed to enhance functionality and flexibility for...
Supported Time Zones for myenergi Products
To ensure the optimal performance of your myenergi devices, selecting the correct time zone is critical. Below is a d...
How do I set up eddi?
Ensuring that your eddi device complies with the latest PTSI (Product Security and Telecommunications Infrastructure)...
eddi v1 Menu Map
Menu Map