Physical Installation
CT Clamp and harvi Calculator for myenergi Installations | System Builder
Getting your CT clamp and harvi configuration right is essential for any myenergi installation — get it wrong and the...
How to Use zappi with Sigenergy Battery — Charge Your EV from Solar Without Draining Your Battery
For homeowners with a Sigenergy SigenStor battery (single-phase and three-phase) and a zappi EV charger.In short: zap...
Do I need to fit a grid CT Clamp?
Watch this short video which explains how the grid CT clamp works and why it’s required across the myenergi ecosystem...
Do I Need to Complete myenergi Training?
No – you do not need to complete myenergi training in order to install our products. If you’re a qualified electrici...
Mounting Points and Drilling Guidance for the zappi
The zappi offers two mounting options: wall mounting and post mounting. This guide provides comprehensive instruc...
EV Charger Installation Guidelines - Australia
EV charger installations in Australia must comply with national and state or territory electrical standards. This g...
Understanding Why You Cannot Daisy Chain zappi Together
Electric Vehicle Supply Equipment (EVSE) charge points, such as the zappi from myenergi, are designed to provide effi...
Installation of conductor cable
Proper installation of a zappi charger is essential for ensuring safe and efficient operation. Incorrect installation...
Understanding what cable size should be used for zappi
Warning
The information provided below is for guidance only. Myenergi products should only be installed by trained p...
Understanding Looped Supplies: Compatibility with the zappi
In this article:
Overview
What do you need to do?
No EV charger should be fitted to a looped supply without prior au...